May 14, 2014
|Dramatically Reduce Defects and Material Costs|
Montreal, Canada (rushPRnews) 05/14/14 — Michelangelo Reduces Metal Stamping Material Costs By 3-6%
“Michelangelo’s patented system dramatically reduces defects by eliminating wrinkling, tearing and splitting and reduces material costs - configurable for any press & any die.”
-- Michelangelo Stamping Inc. today announces they have released their patented Intelligent stamping system that reduces material costs by up to 6% and dramatically reduces defects by virtually eliminating wrinkling, tearing and splitting saving manufacturers thousands of dollars per day.
Michelangelo is a complete variable force actuation system with hydraulic cylinders, hydraulic pressure tanks, manifolds with servo-valves, Intelligent digital computerized control system and customized software user interface. The system uses our patented hydraulic force control technology integrated into a bolster on which the die can be mounted and placed in a press.
Or swap out the “Nitros” and replace each with Michelangelo’s hydraulic cylinders to provide tonnage in the range of 0.5 – 25 tons while costing 50%-60% less than an equivalent nitro (gas spring). By using Michelangelo instead of nitros, the cost for binder force generation can be reduced by up to 70%.
In production, the use of smaller blanks as detailed above together with scrap reduction using automatic tonnage corrections to accommodate for lube build-up, die temperature changes and small thickness variations results in material savings in the range of 6%. For aluminum door-inner panels, this works out to more than $1,000/hour, assuming the parts are being made in a line operating at 10 strokes/min.
Furthermore, downtime to correct production defects is minimized. By using Michelangelo, these costs can be significantly reduced.
Finally, by ensuring a correct binder force tonnage profile, press impact forces are reduced, leading to increased press wear and lower press maintenance costs.
Michelangelo Stamping Inc: Contact Marv Garellek Toll Free: 844-403-2552, Mobile 514-816-6417 or visit www.michelangelostamping.com or email email@example.com
Content- Legal Responsibility - All material is copyrighted - You may repost but you MUST link back to the original post on your page and acknowledge Rush PR News as the news source. Rush PR News is not legally and/or morally responsible for content of press releases, opinions expressed or fact-checking.
Rush PR News cannot be held legally responsible for material published and distributed through its newswire service or published in its press-room and therefore cannot be sued for published material. Third-party must be contacted directly to dispute content.
Rush PR News is not the contact for material published.